Hi. I am going to fit the EFI from an ED Falcon to my 289 Windsor that is in my 1989 Hilux. The engine is not standard. It has 526" lift @ 50 deg. And 302 4V heads with 2.02 in & 1.60 ex valves plus extensive porting. As I am new to EFI!!!
What I want to know is.
1. Which fuel pump is suitable.
2. Do I use a surge tank or swirl pot. If so why?
3. Do I leave my Holley pump before the surge and fit the high pressure after it?
4. Will a standard ECU work if I only want to run the injection?
5. I know I need a few sensors like A/F ratio in the exhaust, temp, air mass.
What else is needed?
6. What other advise can you give. I have a million questions so maybe you could just say what works best from your experience.
7. What I do have is. both manifolds with injectors, rails,loom,dissy, and what ever the sensors are in the bottom manifold. What else is needed?
Thanks Richard...
www.eastcoastcars.net.au