Ford Windsor Forums

can anyone help me to id a motor a bought i have a 289W in my Australian 67 fairlane and thought that i had bought a 302W i know it is a windsor but cant tell if it is a 351W is there any easy way of identifying these two motors or can you recommend any sites that give these types of info and great  the spark plug thread is larger than my 289 ...

I'm going to get a used Harmonic Balancer off the net and my only question is:Does it matter if the new HB is from a 351w with EFI or not?My truck DOES NOT have EFI!'83 F150 with 351W.   Thanks for your Responses!   You guys have helped alot!

Recently acquired my Dad's old Truck. '83 F150 with a 351W in it. Timing chain was replaced and engine was never put back together. I'm new to V8's and was wondering if there are any bolting diagrams for the Timing Chain Cover ,Water Pump and all the pulleys etc.. I have all the parts and all the bolts/studs (hopefully), I just don't know ...

I have a 351W out of a 93 F-250 Im thinking about rebuilding, i want to get as much possible bang for my buck and still have a reliable engine. here are some parts ive been looking at:  Speed-Pro Duroshield Competition Series Rod BearingsRod Bearings, Performance, Standard Size, Duroshield Coated Alloy, Ford, 351W, Set of 8 3/22/08 ...

I'm building up a 1992 5.0 H.O. engine out of a mustang to put in a fullsize Bronco. I purchased it complete, but dissasembled. The pistons and the crank are alittle rough from shelf ware, and it had a blown head gasket caused by a pinhole in one of the water plugs. So, I'm starting off with a bare block. I spoke with a machine shop and they ...

first of is the 302 thats in my truck a windsor. second does anyone else have a fuel problem with the dual tanks. i have found that if one lift pump goes out that the switching valve does not work very well and you loose fuel pressure. is it possible that i could bipass the switching valve and run off one tank with a fuel filter on the high and ...

Try PM'ing FRY302 - hes in Wollongong I think, and has a street rego Cortina that would have to have a decent set of tubs (have a look in the photo galleries).  Also there are some NSW guys at Performance Forums that have a Cortina fetish too. They apparently got their cars engineered as well.    Do you have any pics of the ...