Ford Windsor Forums

We're putting a crate motor ( ACDELCO 302 PN 12364743) into my' 69 Mustang ragtop. We've had  this motor sitting in its crate for lo these last ten years or so, ( bought in about 2000 from a local heavy equipment shop that dropped the AC/Delco franchise and was selling their stock of re-man'fd bullets).  Now that I'm finally about ...

Hi im installing a set of new smeding full roller rockers to my 1971 302w but there seems to be a hight problem with the rockers bottoming out on the posts requiring a full 1/4'' longer push rod and not a very happy valve geometry. Is it comin practice to mill down the rocker mounts on this type of head as a friend has sugjested, and is there a ...

I'm going to get a used Harmonic Balancer off the net and my only question is:Does it matter if the new HB is from a 351w with EFI or not?My truck DOES NOT have EFI!'83 F150 with 351W.   Thanks for your Responses!   You guys have helped alot!

After 209000 miles the main bearings on my 1987 F-150 are refusing to hold oil pressure.  They're worn to the copper, and the cam doesn't look much better from the view underneath. The engine is rated a 185 hp (1–5–4–2–6–3–7-8 firing order), uses a large, two-piece, cast aluminum manifold with a speed-density based EFI system. From what I ...

Stuck in a rut kinda. trying to choose between 2 motors for my datsun to run autocross and scca. First is a stock 1972 truck 4 bbl 302 1000 miles since rebuild, auto trans ...$400 Second is a  1972 truck 4 bbl 351 W dual plane edelbrock intake, auto trans ...$500 both come with all accessories, wiring, and ecu for ...